– 88 –
2) "Count complete" error resetting procedure
If the "count complete" condition is reached, the "count com-
plete" error screen will be displayed.
Reset the current value on the counter by pressing CLEAR
button
M
. Then, the screen returns to the sewing screen.
In the case the close time has been set with the memory
switch "U145: Count completion closing time", CLEAR button
M
will not be displayed.
In the case the close time has been set with the memory
switch "U145: Count completion closing time", CLEAR button
④
Setting the current value of counter
When CURRENT VALUE SETTING button
F
is
pressed, the counter current value input screen is displayed.
Enter the current value with numeric keypad
to
L
,
+ / - button
J
. Then, press ENTER button
K
to confirm.
L
J
K
M