– 51 –
2) How to edit the intermediate presser height
①
Displaying the pattern shape confirmation screen
Press PATTERN SHAPE CONFIRMATION button
A
on
the sewing screen to display the pattern shape confirmation
screen. When INTERMEDIATE PRESER HEIGHT SETTING
button
K
is pressed, the intermediate presser is lifted
and lowered.
②
Changing over to the intermediate presser mode
Select the intermediate presser mode with RADIO button
L
.
The absolute value (reference value of the intermediate
presser increase/decrease value) of the intermediate
presser height is displayed on intermediate presser height
M
.
③
Editing the intermediate presser height
Lower the feeding frame. Proceed stitching.
When SETTING button
M
is pressed, the intermediate
presser height increase/decrease value input screen is dis-
played.
Enter a desired value on this screen with numeric keypad
to
N
and +/- button
O
.
When ENTER button
P
is pressed, the intermediate
presser height increase/decrease value command is inserted
to the current needle position and the data is confirmed.
④
Deleting the command
In the case there is a thread tension increase/decrease value
command at the needle entry point when proceeding stitching,
COMMAND DELETE button
Q
will be displayed. The
command displayed in (
A
) is deleted by pressing COMMAND
DELETE button
Q
and pressing ENTER button
T
on the confirmation screen.
⑤
Finishing editing of the intermediate presser height
When FEEDING FRAME INITIAL POSITION button
R
is
pressed, the feeding frame travels to the sewing start position.
Then, the screen returns to the sewing screen.
N
O
P
T
Q
A
K
S
L
M
A
R
