– 111 –
2-11. Example of operation
This clause gives an example of how to actually operate the device.
2-11-1. In the case both of the two bobbins have been taken out of the device or both
of the two bobbins are empty
1) Turn the power to the device.
2) Set the bobbin-thread winding length to be wound on a bobbin.
Open
A
device tab. Press
B
AW operation but-
ton.
Wait until the initialization operation of the AW device is com-
pleted.
< Data input screen >
B
A
E
C
D
F
G
< Bobbin check screen >
<AW operation screen>
If you want to change the setting, press
C
on the bobbin check screen to
return to the AW operation screen.
Press
D
on the AW operation
screen to display the AW setting item list
screen.
for the respective setting items.)
3) Place the first bobbin in the bobbin setting section. Then,
press
E
. The
bobbin is taken in the device.
“I-4-5-2. How to fit a bobbin in the bobbin case” p.21
for the bobbin setting procedure.)
4) Subsequently, place the second bobbin in the bobbin setting section.
5) As with step 6), press
E
in the similar manner.
6) Now, the device starts winding bobbin. Wait a moment until the device completes winding of bob-
bin.
Press
F
to display the sewing screen. Once the sewing screen is displayed, sewing can be
started.
