– 116 –
2-14-1. Error detection under the normal conditions
2-14. Detection of errors related to the AW
If
F
is pressed or use of any function of the AW device is at-
tempted in the state no bobbin is loaded in the AW (in the state two
bobbins are not loaded) or in the state an error has been detected
on the data input screen, the AW error screen will be displayed.
If no bobbin is loaded in the AW device, the bobbin check screen
will be displayed. On the bobbin check screen, carry out the bobbin
loading operation to load two bobbins in the AW device to reset the
error. After the error is reset, the panel display returns to the normal
screen.
The following switches can be operated on the bobbin check
screen. Refer to
"II-2-9-1. Operating the AW" p.100
for detailed
functions.
The button to be displayed differs according to the bobbin condi
-
tion.
A
: Bobbin take-out button
B
: Empty bobbin loading button
C
: Threaded bobbin loading button
D
: Nozzle air button
F
A
B
C
D
< Data input screen >
< Bobbin check screen >
