– 106 –
When you press
Ⓒ
on the AW setting
item list screen, the allowance length of remaining thread screen is
displayed.
The allowance length of remaining thread is designed to be used
when the bobbin changing method is set to "Auto".
On the aforementioned setting screen, the allowance length of the
remaining thread can be set in the range of 0.01 and 3.50.
The initial value of the allowance length of the remaining thread
can be set with the memory switch U356.
If you want to save the thread winding length set with this AW
setting function, the saving operation to be carried out will differ
according to the destination you want to save it.
< In the case of saving the setting on the main body >
In the case the pattern type is the individual sewing:
To be saved with respect to each pattern data
In the case the pattern type is the cycle sewing:
To be saved with respect to each cycle data
< In the case of saving the setting on a medium >
In the case the pattern type is the individual sewing:
Not to be saved
In the case the pattern type is the cycle sewing:
Not to be saved
The initial value of the allowance length of the remaining thread
can be set with the memory switch U356.
The content you have changed using this AW setting function must
be saved with respect to each pattern data in the case of the indi-
vidual sewing, or with respect to each cycle data in the case of the
cycle sewing.
(3)
Setting of the allowance length of the remaining thread
< Remaining-thread
allowance length setting
screen >
