– 105 –
When you press
Ⓑ
on the AW setting item
list screen, the thread winding length setting screen is displayed.
A
: Numeric keypad
Bobbin-thread winding length can be entered with the numeric
keypad.
Bobbin-thread winding length : Min. 2 m
Max. 200 m
A
< Bobbin-thread winding length
setting screen >
Set the bobbin-thread winding length so that thread
wound on a bobbin do not protrude the bobbin case.
Refer to the table shown below for a guide for the bobbin-thread
winding length.
# 5
TEX 150
TKT 18
13 m
# 8
TEX 90
TKT 30
27 m
# 20
TEX 60
TKT 40
34 m
# 30
TEX 50
TKT 60
56 m
The initial value of the thread winding length can be set with the
memory switch U355.
If you want to save the thread winding length set with this AW
setting function, the saving operation to be carried out will differ
according to the destination you want to save it.
< In the case of saving the setting on the main body >
In the case the pattern type is the individual sewing:
To be saved with respect to each pattern data
In the case the pattern type is the cycle sewing:
To be saved with respect to each cycle data
< In the case of saving the setting on a medium >
In the case the pattern type is the individual sewing:
Not to be saved
In the case the pattern type is the cycle sewing:
Not to be saved
(2)
Setting the thread winding length
