– 63 –
(1) How to correct the position on the pattern-by-pattern basis / cycle-by-cycle basis
For the correction of position on a pattern-by-pattern / cycle-by-cycle step basis, the correction amount
of position can be set with reference to the coordinates of an arbitrary needle entry point of the selected
pattern data. Setting can be carried out on the shape confirmation screen.
* To carry out the correction of position on the pattern-by-pattern basis / cycle-by-cycle basis, set the
memory switch [U406: Enable/disable of the position correction button] to [Enable].
①
Displaying the shape confirmation screen
Change the current screen over to the sewing screen. Press
to display the shape confirmation screen.
Refer to
"II-2-4-5. How to check the sewing pattern shape"
②
Moving the needle entry point to the one that is used as
the reference position
Operate the presser foot pedal to lower the feeding frame.
Then, move the needle entry point to the one you want to use
as the reference position with
A
.
A
B
