– 48 –
It is possible to check the needle entry point positions and to check whether the sewing pattern extends
outside the feeding frame.
2-4-5. How to check the sewing pattern shape
1) Basic operation
①
Displaying the sewing screen
Display the patturn setting screen. Press READY button
A
to display the sewing screen on which the sewing machine
can start sewing. When READY button
A
is pressed,
the feeding frame retrieves the origin and moves to the sewing
start position.
If READY button
A
is pressed while the feeding
frame is in its upper position, the feeding frame will
firstly come down, then will start moving to the sew
-
ing start position. In this case, be careful not to allow
your fingers to be caught under the feeding frame.
②
Displaying the pattern shape confirmation screen
When PATTERN SHAPE CONFIRMATION button
B
is
pressed, the pattern shape confirmation screen is displayed.
Current point (pink ), sewing start position (blue ) and
sewing end position (pink dot ) are displayed on the pattern
shape shown at the center of screen.
③
Lowering the feeding frame
When the pedal switch is depressed, the feeding frame comes
down.
④
Proceeding stitching to check the position of needle
entry points
Check the sewing pattern shape with ONE-STITCH BACK-
WARD button
C
and ONE-STITCH FORWARD button
D
.
In the case two or more commands have been entered at the
needle entry point, the feeding frame will not move but the
command display will be moved forward or backward.
⑤
Finishing the pattern shape confirmation
When FEEDING FRAME INITIAL POSITION button
E
is
pressed, the feeding frame travels to the sewing start position
and goes up. Then, the screen returns to the sewing screen.
When CANCEL button
F
is pressed, the screen returns
to the sewing screen while remaining the feeding frame at the
current position. In such a case, it is possible to re-start sew-
ing from the midpoint of confirmation procedure by depressing
the pedal switch.
A
B
C
D
F
G
E
