– 44 –
(4) Enlargement / reduction tab
It is possible to enlarge / reduce the pattern immediately before starting sewing.
Enlargement / reduction of the pattern is computed, in the aforementioned case, by the "number of
stitches fixing method (by increasing / decreasing the number of pitches) regardless of the memory
switch setting.
In the case enlargement reduction is carried out on the enlargement / reduction tab display, the pedal
switch operating method is different from that for the normal sewing only for the first sewing after the
enlargement / reduction ratio is changed.
From the second sewing and beyond, the pedal switch can be operated in the method employed for the
normal sewing.
①
Selecting the enlargement / reduction tab
Select enlargement / reduction tab
D
with MULTIFUNC-
TION TAB DISPLAY SELECTION button.
②
Setting the enlargement / reduction ratio
Set the enlargement / reduction ratio with +/- button
E
.
③
Computing the enlargement / reduction and starting
sewing
Carry out computation of the enlargement / reduction of the
pattern by operating the pedal. Then, start sewing by operat-
ing the pedal again. (For the operating the pedal, refer to
D
E
[In case of 2P pedal]
1) Set a workpiece on the sewing machine.
2) Depress the pedal switch
A
, and the feeding
frame will come down. Depress it again, and
the feeding frame will go up.
3) Lower the feeding frame. Then press pedal
switch
B
to carry out computation of the en-
largement / reduction of the pattern.
4) Depress pedal switch
B
again to start sew-
ing.
5) After the sewing machine completes sewing,
the needle point will return to the start point
and the feeding frame will go up.
2P pedal
A
B
