– 67 –
③
Teaching correction amount
When teaching button
C
is pressed, the position correc-
tion teaching screen is displayed.
When move button
G
is pressed, the presser foot
travels from the reference-position coordinates, and the travel
amount is displayed as the correction amount.
When teaching button
C
is pressed, the press
-
er foot travels to the reference-position coordinates.
Take care of this operation of the presser foot.
④
Confirming the correction amount
When enter button
E
is pressed, the correction amount
is confirmed, and the screen returns to the pattern position
correction screen.
E
D
F
G
⑤
Setting enable/disable
F
of the reference position cor
-
rection
In this step of procedure, enable/disable of the position correc-
tion that has been set in the previous procedure is set.
The enable/disable status is changed over by pressing enable/
disable changeover button
F
.
[In the case the reference position correction is set to
enable
]
The correction amount for the reference position of the device
is applied.
The reference position is corrected according to the number of
effective reference positions.
[In the case the reference position correction is set to
disable
]
The correction amount for the reference position of the device
is not applied.
⑥
Confirming enable/disable
F
of the reference position
correction
When enter button
G
is pressed, enable/disable of the
reference-position correction is confirmed, and the screen
returns to the list (maintenance personnel level) screen.
