www.jouleuk.co.uk | www.joule.ie
54
Victorum Compact
Heat Pump Primary Connections
The Flow and Return connection sizes are
Ø15mm compression.
Flow colour reference - red
Return colour reference - blue
The primary flow and return pipes are pre-in-
stalled in the bottom section using flexible pipe
sections. Connect the primary pipes to the tails
on the bottom of the top section using the swivel
nuts on the flexible pipes and insert the DN12
gaskets provided.
Connecting the Drain Hose
The drain pipe is pre-installed in the bottom
section and there is a flared copper section
underneath the drain spigot of the top section.
The flexible hose supplied with the unit must
be used to connect the top section to the flared
copper upstand.
Cut the flexible hose to the correct length so it
inserts halfway into the copper upstand. Insert
the hose into the copper upstand first and then
slide upwards over the spigot on the Heat Pump.
Terminating the Drain Pipe
The drain pipe terminates in the bottom section
beside the Tundish on the left hand side. It is the
installers responsibility to connect the drain pipe
to a suitable location to allow sufficient drainage
from the unit.
Piping
