www.jouleuk.co.uk | www.joule.ie
12
Victorum EAHP Unit
Pre-Installation Notes
• Store the manual in a safe place in order to be able to use it as reference after installation. For
maximum safety installers should always read the following warnings carefully.
• Store the provided manual in a safe location with the end user after installation, and remember
to hand it over to the new end user if the Heat Pump & Cylinder unit is sold or transferred.
• The Exhaust Air Heat Pump is compliant with the requirements of the Low Voltage Directive
(2014/35/EU), the EMC Directive (2014/30/EU) and the pressure equipment directive (2014/68/EU).
• The manufacturers shall not be responsible for damage originating from unauthorised changes
or the improper connection of electric and hydraulic lines.
• Do not use units if you see some damage on them and notice something untoward such as loud
noise, smell or burning.
• In order to prevent electric shocks, fires or injuries, always stop the unit, disable the protection
switch and contact Joule’s technical support if the unit produces smoke, if the power cable is
hot or damaged, or if the unit is very noisy.
• Always remember to inspect the unit, electric connections, refrigerant tubes and protections
regularly. These operations shall be performed by qualified personnel only.
• The unit contains moving parts and electrical parts which should always be kept out of the
reach of children.
• Unauthorised personnel should not attempt to repair, move, alter or reinstall the unit. These
operations may cause product damage, electric shock and fires.
• Do not place containers with liquids or other objects on the unit.
• All the materials used for the manufacture and packaging of the Exhaust Air heat pump are
recyclable. The packaging material and exhaust batteries of the remote controller (optional)
must be disposed of in accordance with local regulations.
• The Exhaust Air Heat Pump containing a refrigerant must be disposed in an authorised centre
or returned to retailer as special wastes.
• To avoid your hands being injured by the edge of the parts wear protective gloves to unpack,
move, install, and service the unit. Do not touch the internal parts (water pipes, refrigerant
pipes, heat exchangers, etc) while running the units. If you need to adjust and touch the units,
allow sufficient time for the unit to cool and be sure to wear suitable personal protective equip-
ment.
• In case of refrigerant leakage, try to avoid contact with the refrigerant as this could result in
severe wounds.
