Victorum Exhaust Air Heat Pump Installation Guide
15
Victorum EAHP Unit
Transport & Handling
Handling Instructions
•
Care must be taken when transporting, storing
and installing the Heat Pump.
•
The Victorum unit is delivered fully packaged
and fixed to a wooden pallet base. Care should
be taken when transporting the Heat Pump
ensuring that the unit is not damaged by impact.
•
The Heat Pump must remain in the upright
position during transport.
•
Do not remove the protective packaging until the
Heat Pump unit has reached its final location.
This will help protect the heatpump from damage.
•
For transport, e.g. via a stairs, the Heat Pump
may be tilted for a maximum of 15 minutes up to
a maximum angle of 45 degrees.
•
The Heat Pump weighs 45kg. At least two people
are required to lift the unit at all times.
•
The Heat Pump must be stored in a dry area
and always stored upright on a level base. The
unit must never be dropped during storage or
handling
•
Packaging should only be removed at the
installation location.
•
The installation area should be free from frost.
•
The Victorum unit only must be installed on a
plumb level wall with the required load bearing
capability.
•
Installation, servicing, maintenance and repair
must be carried out by a competent person.
Use a lifting tool if moving the Victorum upstairs.
