Removal
REMOVAL
1. Remove piston and connecting rod. See
Engine/Engine Block/ROD, Piston and Connecting -
Removal
.
2. Remove No. 1 and No. 2 piston rings from piston using a ring expander tool.
3. Remove upper oil ring side rail.
4. Remove lower oil ring side rail.
5. Remove oil ring expander.
Installation
INSTALLATION
Fig. 155: Piston Ring Installation
Courtesy of CHRYSLER LLC
1. Install rings with manufacturers I.D. mark (if present) facing up, to the top of the piston.
1 - NO. 1 PISTON RING
2 - NO. 2 PISTON RING
3 - SIDE RAIL
4 - OIL RING
5 - SPACER EXPANDER
CAUTION: Install piston rings in the following order:
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:31 p. m.
Page 125
© 2011 Mitchell Repair Information Company, LLC.