Fig. 88: CYLINDER HEAD COVER GASKET
Courtesy of CHRYSLER LLC
1. Clean cylinder head and cylinder head cover mating surfaces. Inspect cylinder head cover surface for
flatness. Replace gasket as necessary.
2. Inspect seal on the cover bolt for wear or damage. Replace bolt assembly (2) as necessary.
3. Inspect the PCV hose for damage. replace as necessary.
4. Assemble gasket to cylinder cover by inserting the bolt assemblies through each bolt hole on the cover
and gasket (4).
Fig. 89: CYLINDER HEAD COVER GASKET
Courtesy of CHRYSLER LLC
1 - CYLINDER HEAD COVER
2 - BOLT
3 - SEAL (SERVICED WITH BOLT)
4 - GASKET
NOTE:
The cylinder head cover bolts (2) contain a torque limiter sleeve and a
seal. The seal and torque sleeve is replaced with the bolt.
1 - CYLINDER HEAD COVER
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:30 p. m.
Page 67
© 2011 Mitchell Repair Information Company, LLC.
