Fig. 173: Rear Mount (Manual Transmission)
Courtesy of CHRYSLER LLC
1. Position the skid plate to the studs of the support cushion and install the nuts. Tighten the nuts to 28 N.m
(21 ft. lbs.) torque.
2. Install the skid plate bolts to the sill and tighten to 75 N.m (55 ft. lbs.) torque.
3. Remove the transmission support.
4. Lower the vehicle.
5. Connect negative cable to battery.
6. Position the transmission mount bracket to the transmission and install the bolts.
7. Tighten the bolts to 54 N.m (40 ft. lbs.) torque.
8. Position the support cushion (2) to the transmission mount bracket and install nuts.
AUTOMATIC TRANSMISSION
1 - CUSHION
2 - BRACKET
3 - SKID PLATE
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:31 p. m.
Page 142
© 2011 Mitchell Repair Information Company, LLC.
