Fig. 199: Oil Pressure Relief Valve
Courtesy of CHRYSLER LLC
1. Clean relief valve, spring and bore.
2. Install the spring (1) into housing.
3. Install the relief valve (2) into housing, open end first.
4. Install a new retainer cap (3), open end out, until the cap is 1.75 mm (0.068 in.) to 2.25 mm (0.088 in.)
past the sealing surface.
5. Install oil pan.
6. Fill crankcase with proper oil to correct level.
MANIFOLDS
MANIFOLD, EXHAUST, LEFT
Removal
REMOVAL
1 - SPRING
2 - RELIEF VALVE
3 - RETAINER CAP
NOTE:
Always use a new relief valve. Do not reuse the old relief valve, it could have
been damaged during removal.
NOTE:
Lubricate relief valve with clean engine oil before installing.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:32 p. m.
Page 163
© 2011 Mitchell Repair Information Company, LLC.
