4. Repair as required.
Standard Procedure
MANIFOLD STRIPPED THREAD REPAIR
The composite upper intake manifold thread bosses, if stripped out, can be repaired by utilizing a repair screw
available through Mopar® parts. Repair screws are available for the following manifold attached components:
MAP sensor
Power steering reservoir
EGR tube
Throttle cable bracket
The repair screws require a unique tightening torque specification from the original screw. Refer to the
following chart for specification.
INTAKE MANIFOLD VACUUM PORT REPAIR
DESCRIPTION
TORQUE*
STRIP-OUT REPAIR SCREWS ONLY
MAP Sensor Repair Screw
4 N.m (35 in. lbs.)
Power Steering Reservoir Repair Screw
9 N.m (80 in. lbs.)
EGR Tube Attaching Repair Screw
9 N.m (80 in. lbs.)
Throttle Cable Bracket Repair Screw
9 N.m (80 in. lbs.)
*Install Slowly Using Hand Tools Only
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:32 p. m.
Page 171
© 2011 Mitchell Repair Information Company, LLC.
