Fig. 92: ROCKER ARMS AND SHAFT
Courtesy of CHRYSLER LLC
2. Remove rocker arms . Identify the component locations for reassembly in original locations.
Assembly
ASSEMBLY
1. Install rocker arms on the shaft. Install in the original positions if reused.
Ensure
the rocker shaft, all the
retainers and washers are properly positioned and installed in the correct locations.
2. Install rocker arms and shaft to the cylinder head. See
Engine/Cylinder Head/ROCKER ARM, Valve -
Installation
.
Installation
1 - BOLT (ROCKER SHAFT
OIL FEED - LONGER
LENGTH)
5 - ROCKER ARM -
EXHAUST
2 - SHAFT
RETAINER/SPACER - 21.5
mm (0.84 in.)
6 - WASHER
3 - SHAFT
RETAINER/SPACER - 37.5
mm (1.47 in.)
7 - ROCKER ARM -
INTAKE (LARGER
OFFSET)
4 - SHAFT
RETAINER/SPACER - 40.9
mm (1.61 in.)
8 - ROCKER ARMS
LUBRICATION FEED
HOLE (POSITION
UPWARD AND TOWARD
VALVE SPRING)
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:30 p. m.
Page 71
© 2011 Mitchell Repair Information Company, LLC.
