Fig. 178: 3.8L Oil Pressure Switch
Courtesy of CHRYSLER LLC
Change engine oil at mileage and time intervals described in the Maintenance Schedule. Refer to
Vehicle
Quick Reference/Maintenance Schedules - Description
.
Run engine until achieving normal operating temperature.
1. Open hood, remove oil fill cap.
2. Place a suitable drain pan under crankcase drain.
3. Remove drain plug from crankcase and allow oil to drain into pan. Inspect drain plug threads for
stretching or other damage. Replace drain plug if damaged.
4. Remove oil filter (2).
5. Install and tighten drain plug in crankcase.
6. Install new oil filter (2).
7. Lower vehicle and fill crankcase with specified type and amount of engine oil.
8. Install oil fill cap.
WARNING:
NEW OR USED ENGINE OIL CAN BE IRRITATING TO THE SKIN. AVOID
PROLONGED OR REPEATED SKIN CONTACT WITH ENGINE OIL.
CONTAMINANTS IN USED ENGINE OIL, CAUSED BY INTERNAL
COMBUSTION, CAN BE HAZARDOUS TO YOUR HEALTH. THOROUGHLY
WASH EXPOSED SKIN WITH SOAP AND WATER. DO NOT WASH SKIN
WITH GASOLINE, DIESEL FUEL, THINNER, OR SOLVENTS, HEALTH
PROBLEMS CAN RESULT. DO NOT POLLUTE, DISPOSE OF USED
ENGINE OIL PROPERLY. CONTACT YOUR DEALER OR GOVERNMENT
AGENCY FOR LOCATION OF COLLECTION CENTER IN YOUR AREA.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:32 p. m.
Page 147
© 2011 Mitchell Repair Information Company, LLC.
