1. Position exhaust manifold (1) on cylinder head. Install bolts to center runner (cylinder #4) and initial
tighten to 2.8 N.m (25 in. lbs.).
2. Position heat shield (2) on manifold.
3. Install the remaining manifold attaching bolts. Tighten all bolts to 23 N.m (200 in. lbs.).
4. Install and tighten heat shield attaching nut (3) to 12 N.m (105 in. lbs.).
Fig. 203: O2 SENSORS LEFT SIDE
Courtesy of CHRYSLER LLC
5. Attach exhaust pipe to exhaust manifold and tighten bolts to 41 N.m (30 ft. lbs.).
6. Connect the left side oxygen sensors (1,2).
7. Connect battery negative cable.
MANIFOLD, EXHAUST, RIGHT
Removal
REMOVAL
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:32 p. m.
Page 166
© 2011 Mitchell Repair Information Company, LLC.
