Fig. 139: CRANKSHAFT AND BLOCK - 3.8L
Courtesy of CHRYSLER LLC
12. Remove and discard the main bearing cross bolts and washers (8).
1 - MAIN BEARING CAP No. 4
2 - MAIN BEARING CAP No. 3
3 - MAIN BEARING CAP No. 2
4 - MAIN BEARING CAP BOLT
5 - MAIN BEARING CAP No. 1
6 - THRUST MAIN BEARING - LOWER
7 - THRUST MAIN BEARING - UPPER
8 - MAIN BEARING CAP CROSS BOLT
9 - ENGINE BLOCK
10 - MAIN BEARING - UPPER
11 - CRANKSHAFT
12 - MAIN BEARING - LOWER
NOTE:
Install new cross bolt and washer assembly (8) upon reassembly.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:31 p. m.
Page 109
© 2011 Mitchell Repair Information Company, LLC.
