Courtesy of CHRYSLER LLC
10. Remove the intake manifold bolts.
11. Remove lower intake manifold.
12. Remove intake manifold seal retainers screws. Remove intake manifold gasket.
Cleaning
CLEANING
1. Discard gasket(s).
2. Clean all sealing surfaces.
Inspection
INSPECTION
Check for:
Damage and cracks of each section.
Clogged water passages in end cross-overs (if equipped).
Check for cylinder head mounting surface distortion using a straightedge and thickness gauge. See
Engine/Cylinder Head - Inspection
.
Installation
LOWER INTAKE MANIFOLD
WARNING:
INTAKE MANIFOLD GASKET IS MADE OF VERY THIN METAL AND
MAY CAUSE PERSONAL INJURY, HANDLE WITH CARE.
2010 Jeep Wrangler Sport
2010 ENGINE 3.8L - Service Information - Wrangler
viernes, 1 de octubre de 2021 05:18:32 p. m.
Page 184
© 2011 Mitchell Repair Information Company, LLC.
