![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589085.webp)
Page 73
VIS CAM 300/400 Installation Manual
Appendix B: J-Panel Functional and Connector Description
6.3.3 (b) Trigger output
Description
The trigger output is balanced and the driver is a RS485 transmitter (LTC1480).
Signal levels
The signals are standard RS485 levels. The specification below is taken from Linear Technologies
datasheet for LTC1480:
TABLE 20.
Signal table
Electrical interface on the J-Panel:
FIGURE 68.
J-panel electrical interface
6.3.3 (c) Ethernet Interface
100 Mb Ethernet interface. The signals are routed directly to RJ45 connector X12. The cable to the
camera must be a Cat 5e or preferably a Cat 6 cable. The wire color marking on the PCB uses standard
Ethernet wire colors.
6.3.3 (d) Power output
Voltage:
24VDC from power supply connected to X6 or X7
Current:
2A fused
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......