Page 72
VIS CAM 300/400 Installation Manual
Appendix B: J-Panel Functional and Connector Description
6.3 X2: J-panel connection to Camera 1
FIGURE 67.
Board and camera J-panel connection to camera 1.
6.3.1 Functionality
Power and data connection to the EN camera. The 24V power supply for all camera functions (Camera,
I/O Board, light and heaters), Ethernet and RS485 data communication is connected by means of this
connector.
6.3.2 Connector specification
Connector type:
16 pole WAGO pluggable terminal block
Connector on board:
WAGO 734-246
Cable part:
WAGO 734-216
6.3.3 Connector signal specifications
6.3.3 (a) Lane Controller interface
Description
RS485 two wire half-duplex multi-drop communication network. The I/O Board has connections for
daisy chain configuration. The two signal pairs ( and RS485D-) can be reversed.
Signal levels:
Standard RS485 communication levels.
Electrical interface on the J-Panel:
The signals are connected to J-Panel X15 pin 4 and 5. There are termination resistors on the board. See
Figure 49 on page 53 for a description of the signal path.
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......