![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589063.webp)
Page 51
VIS CAM 300/400 Installation Manual
Appendix A: Camera Functional and Connector Description
Electrical Interface on the I/O board:
FIGURE 45.
I/O board electrical interface.
Test
A push button switch S1 can be activated for generation of an output pulse for test purposes. The flash
output is high as long as the switch is activated. The switch is located as shown on Figure 46:
FIGURE 46.
Switch location.
5.3.4 Connector physical Interface
TABLE 12.
Wiring diagram.
Pin
Signal
Description
Connection to
1
I/O Gnd
IO Board Gnd
Pin 2 when no power is available from the flash
2
Gnd
Flash Gnd
Flash ground (negative power terminal)
3
Out
Strobe out
Strobe input on flash unit
4
Stat
Strobe status
Status output from flash unit
5
FPWR
Flash power
Power from flash to output circuit on I/O Board
6
24V
IO board 24V (Fused 0.5A) Pin 5 when no power is available from the flash
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......