![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589104.webp)
Page 92
VIS CAM 300/400 Installation Manual
Appendix D: Pluggable Terminal Blocks
8
Appendix D: Pluggable Terminal Blocks
The connectors on the VIS CAM 300 IO Board and J-Panel are pluggable terminal blocks with pin
spacing of 3.81 mm/ 0.15 inch from WAGO. The contacts are spring loaded.
FIGURE 86.
Terminal block
TABLE 35.
Essential specifications for the pluggable terminal block.
When mounting the wire into the connector the wire is stripped 7mm. The connector spring is released
by using one of two tools:
The wire is inserted and the spring is activated.
Cross section from [mm²]
0,08 mm²
Cross section to [mm²]
1,5 mm²
Cross section from [AWG]
28 AWG
Cross section to [AWG]
14 AWG
Measured voltage EN
250 V
Measured shock voltage
2,5 kV
*Pollution degree
2
Current intensity EN
10 A
Strip length from
7 mm
Strip length to
7 mm
Strip length
0,28 in
WAGO 734-230
JAI 2900.00.249
WAGO 210-250
JAI 2900.00.250
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......