![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589039.webp)
Page 27
VIS CAM 300/400 Installation Manual
Installing the Vehicle Imaging System
3.3.6 X15 Lane Controller Connector (X4 and X5)
The Lane Controller connection to the J-Panel is connector X15. The connections are listed in Table 8 .
TABLE 8.
X15 Lane Controller
It is possible to have one Lane Controller connected to several cameras or one Lane Controller to each
camera:
One Lane Controller for two or more cameras
1.
The Lane Controller is connected to the X15 pin 1 and 2 (no connections to pin 4 and 5)
2.
Switch S2 position “OPEN”
3.
The Lane Controller can be connected to more J-Panels by connecting RJ45 patch cables between
connector X4 and connector X5 on the next J-Panel (and from X4 on the next J-Panel to X5 on the
third J-Panel). Switch S2 on the other J-Panels must also be in the “OPEN” position.
Two Lane Controller to two cameras
1.
The Lane Controller for camera 0 is connected to X15 pin 1 and 2
2.
The Lane Controller for camera 1 is connected to X15 pin 4 and 5
3.
Switch S2 position “TERM”
4.
Do not connect any cables to X4 and X5
FIGURE 25.
Two lane controller.
X15 Pin #
Signal
Description
Connection to
1
D0+
RS485 databus D0+
Lane Controller databus 0+
2
D0-
RS485 databus D0-
Lane Controller databus 0-
3
Gnd
gnd
gnd
4
D1+
RS485 databus D1+
Lane Controller databus 1+
5
D1-
RS485 databus D1-
Lane Controller databus 1-
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......