![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589090.webp)
Page 78
VIS CAM 300/400 Installation Manual
Appendix B: J-Panel Functional and Connector Description
6.5 X4: Lane Controller Signal to J-Panel #2
FIGURE 72.
Signal to J-panel #2
6.5.1 Functionality
Lane Controller RS485 signal to a second J-Panel. The Lane Controller connected to X15 pin 1 and pin
2 or a Lane Controller signal coming from another J-Panel can be connected by means of this connector.
If no plug is inserted into the connector a build-in switch activates a 120
Ω
termination resistor.
6.5.2 Connector specification
Connector type:
8 pole shielded RJ45
Connector on board:
Taitek/Kinsun ST3009S-880
Cable part:
Standard RJ45 connector
6.5.3 Connector signal specifications
Datasignal
RS485 databus signals from the Lane Controller.
6.5.4 Connector physical Interface
TABLE 26.
Physical connector table for J-panel 2.
Pin
Signal
Description
Connection to
1
RS485+
RS485 databus D+
2
RS485-
RS485 databus D-
3
-
Nc
4
-
Nc
5
-
Nc
6
-
Nc
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......