![JAI Vehicle Imaging Subsystem 300 Installation Manual Download Page 49](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589049.webp)
Page 37
VIS CAM 300/400 Installation Manual
System Set-Up
FIGURE 32.
Roll Bar Display example.
Pan the camera mount until the plate stand is centered under the default position of the vertical line in
the middle of the “Roll Bar” display. Securely tighten the pan bolt. Be careful not to change the pan of
the camera while you tighten the bolt. Oppositely twisting two 9/16" closed-end wrenches is
recommended (one for the bolt head and one for the nut) to help prevent the pan from moving while you
tighten the bolt.
Switch back to the “Tilt Line” display. Tilt the camera mount until the plate is positioned just above the
tilt line. Re-adjust the zoom as necessary until the plate just fits in between the zoom markers on the
“Tilt Line”. Changing zoom usually requires that the tilt adjustment be modified also. Do not tighten
the Tilt bolts until after the final lens adjustment. See Figure 33.
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......