![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589066.webp)
Page 54
VIS CAM 300/400 Installation Manual
Appendix A: Camera Functional and Connector Description
5.3.8 Connector specification
Connector type:
4 pole WAGO pluggable terminal block
Connector on board:
WAGO 734-234
Cable part:
WAGO 734-204
5.3.9 Connector signal specifications
Description
A 5V logic inverter drives the output. The inverter is a HCMOS type 74AHC14.
Output signal specification:
Signal amplitude
5V TTL
Output impedance
100
Ω
Pulse width
5 ms ± 1 ms
Signal polarity
active high
External power requirement
Voltage
8-26Vdc
Current
max 25mA
Electrical interface on the I/O board:
FIGURE 51.
IO board electrical interface.
Test
A push button switch S2 can be activated to generate an output pulse for test purposes. The light/flash 2
output is high as long as the switch is activated. The switch is located as shown on Figure 51:
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......