![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589109.webp)
Page 97
VIS CAM 300/400 Installation Manual
Appendix E: Moxa N-Port 5232 Configuration
Operating settings port 1:
Operation mode:
TCP
– specify the operation mode of the serial channel – currently TCP is
required for communication with the TLS200 light sensor – UDP will be
implemented in the nearer future.
TCP alive check time:
1
- Specify the alive time for the TCP communication.
Inactivity time:
0
– Specify the timeframe for closing an idle serial line.
Max connections:
4
– Specify the amount of simultaneous TCP connections.
Ignore jammed IP
Yes
Allow driver control
No
Data Packing
Delimiter 1:
D
– Specify the size of the delimiter (entry in Hex).
Force transmit:
30
– Specify the time frame for forced transmit (entry in mS).
TCP Server Mode
Local TCP port:
4001
– Specify the broadcast port. 4001 is default.
Command port:
966 – Specify the command port. 966 is default.
FIGURE 92.
Operation configuration of Serial port 1:
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......