![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589003.webp)
Page iii
Notice
The material contained in this manual consists of information that is proprietary to JAI Inc., and may only be used by the pur-
chasers of the product. JAI Inc. makes no warranty for the use of its product and assumes no responsibility for any errors
which may appear or for damages resulting from the use of the information contained herein. JAI Inc. reserves the right to
make changes without notice.
Microsoft, Windows XP, Windows 2000, Windows 98, Windows NT, and Windows Explorer are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other countries.
Warranty
Each JAI product is warranted to be free from defects in material and workmanship under normal intended use and service if
installed in accordance with this manual. The warranty period is 2-years and begins on the date of shipment from JAI stock.
This warranty shall not apply to repairs or replacements necessitated by any cause beyond the control of JAI, including but not
limited to, 1) improper installation, 2) acts of nature, 3) accidents, 4) misuse, 5) lack of proper maintenance, 6) unauthorized
repairs or modifications.
Be advised, that you need to obtain an RMA number from JAI before returning units for warranty repair.
Certifications
CE Compliance
The TS-2030EN and TS-9720EN series of cameras have been certified to conform to the requirements of Council Directive
89/336/EC for electromagnetic compatibility and to comply with the following European Standards:
Emissions: EN 55022A: 1998 + A1: 2000 + A2: 2003
Immunity:
EN55024: 1998 + A1: 2001 + A2: 2003
All JAI products bearing the CE mark have been declared to be in conformance with the applicable EEC Council Directives.
However, certain factory-installed options or customer-requested modifications may compromise electromagnetic compatibil-
ity and affect CE compliance. Please note that the use of interconnect cables that are not properly grounded and shielded may
affect CE compliance.
Contact JAI Applications Engineering Department for further information regarding CE compliance.
FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Oper-
ation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
A
SS
OCIATIO
N
A
UT
OM
ATED IMA
G
IN
G
MEMBER
R
E
G
IS
TERED
FI
R
M
UL
®
JAI PULNiX, INC.
ISO-9001
FILE #
A3942
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......