![background image](http://html.mh-extra.com/html/jai/vehicle-imaging-subsystem-300/vehicle-imaging-subsystem-300_installation-manual_631589103.webp)
Page 91
VIS CAM 300/400 Installation Manual
Appendix C: Two Cameras, One Flash Configuration
Three wires are connected from the flash connector on the IO Board of the Master camera to the laser
(LVD) connector on the IO Board of the Slave camera:
TABLE 34.
Master to slave connections.
•
Junction Panel trigger polarity switch in position “positive going edge”
•
Master camera flash must be set to “auto” in Properties section of ENSetup software
•
Slave camera flash must be set to “light sensor control” in properties section of ENSetup software
Master Flash Connector
(X5)
Slave Laser Connector
(X7)
Pin 2
Pin 2
Pin 3
Pin 3
Pin 5
Pin 1
Summary of Contents for Vehicle Imaging Subsystem 300
Page 2: ...Page ii Vehicle Imaging Subsystem 300 400 ...
Page 12: ...Page xii List of Tables ...
Page 114: ...Page 102 VIS CAM 300 400 Installation Manual ...
Page 115: ......