OPERATION
53
Rear PTO Shaft
FIG. 5-20:
A six-spline (35 mm) PTO shaft, 1, is pro-
vided at rear of Tractor to provide power for mounted
and other PTO driven equipment as required.
A protective cover is positioned over shaft splines
when not in use.
Normal rear PTO shaft operating speed.
540 rpm @ 2484 engine rpm
1000 rpm @ 2290 engine rpm
IMPORTANT: When rear PTO is used with three-
point mounted equipment, it may be
necessary to remove drawbar, 2, at
rear of Tractor. Some types of mount-
ed equipment, when lowered, may al-
low PTO shaft to contact drawbar.
FIG. 5-21:
Implement driveshaft shown connected to
tractor rear PTO shaft.
CAUTION: Make sure all PTO shields are
installed on Tractor and equipment. Be-
fore cleaning or adjusting Tractor or PTO
driven machine, SHUT OFF ENGINE AND
DISENGAGE PTO.
Mid PTO Shaft (“Rear ROPS”)
FIG. 5-22:
Mid PTO, 1, is a forward-facing shaft
located at underside of Tractor. This accessory can
be installed to operate certain mid or front-mounted
implements.
ASAE S431 25mm 15 spline shaft is used.
Normal mid PTO shaft operating speed:
2080 rpm @ engine 2600 rpm.....TH4335, 4365
2000 rpm @ engine 2500 rpm.....TH4295
Mid PTO cover must be installed when use of mid
PTO is not required.
CAUTION: Make sure all PTO shields are
installed on tractor and equipment. Before
cleaning or adjusting tractor or any PTO
driven machine, SHUT OFF ENGINE AND
DISENGAGE PTO.
1
2
FIG. 5-20
FIG. 5-21
FIG. 5-22
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
