SAFETY
15
When disconnecting the battery cables, disconnect
the earth cable (-) first without fail. When connecting
the battery cables, connect the positive cable (+) first.
Disconnecting or connecting in wrong order may lead
to a short circuit or sparks.
TO HANDLE BOOSTER CABLES
When using booster cables, pay attention to the fol-
lowing items for safe operation:
(1) Before connecting cables, remove the vent plugs.
This will lower the force in case of explosion.
(2) Before connecting cables, be sure to stop the en-
gine. Otherwise unexpected accidents may occur.
(3) Use booster cables with sufficient electrical ca-
pacity. A cable of inadequate capacity will cause
generation of heat, which may lead to a fire.
SAFETY DECALS
The labels are stuck on the tractor. You should of
course read the safety instructions in the manual. But
never fail to read the labels on the machine as well.
• The labels should always be clearly seen, that is,
nothing should obscure them.
• When they have become dirty, wash them with soap
water and wipe off with soft cloth.
• If any of them are torn or lost, order new labels from
your dealer. Their codes are mentioned in “SAFETY
DECALS AND THEIR LOCATION”.
• A new label should be placed in the same place
where the old one was located.
• When sticking on a new label, clean the place to
enable the label to stick and squeeze out all air
bubbles trapped under it.
FIG. 1-24
FIG. 1-25
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
