TH4295,4335,4365
50
Stopping Tractor
FIG. 5-12:
To stop the tractor with a hydrostatic trans-
mission, release the forward HST pedal (3).
This action will stop forward travel. Move the throttle
lever (1) forward to reduce engine speed, depress the
brake pedal (2) and set the parking brake lever (3).
Move the range shift lever (5) to neutral position.
Allow the engine to idle several minutes to allow even
cooling, then turn the main switch to the “off” position,
shutting off the engine.
Lower the three-point hitch and remove the key from
the main switch.
CAUTION: Make sure brakes are adjusted
evenly.
CRUISE CONTROL
Setting cruise control
Depress the forward pedal (3) and keep your intended
speed. And shift the cruise control lever (6) to “ON”
position.
CAUTION: Even though it is possible
to engage cruise control when driving
backward, do not use it at the time for
safety reason.
Releasing cruise control
Cruise control is released if the lever is returned
to neutral position gradually or brake pedal (2) is
depressed.
CAUTION: If cruise control is released by
depressing brake pedal, it is dangerous
because brake is engaged at the same
time. Except for emergency case, release
the cruise control by shifting cruise con-
trol lever to neutral position gradually.
WARNING: Cruise control should only be
used in open spaces, without obstacles,
with unobstructed view or traveling on
road. You must also be thoroughly famil-
iar with releasing cruise control.
1
4
5
2
3
2
3
n/min
6
FIG. 5-12
FIG. 5-13
FIG. 5-14
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
