TH4295,4335,4365
88
Neutral start system
WARNING: DO NOT bypass or modify the
neutral switch system. If the switch sys-
tem does not operate properly, consult
your dealer immediately.
This tractor is equipped with a neutral start system
consisting of neutral switches and a relay.
To start the tractor, ALL the following is required:
- Operator must be seated in the operator’s seat.
- Range shift lever must be in the neutral position
(non synchroshuttle only).
- Shuttle lever must be in the neutral position
(synchroshuttle only). [The engine might be started
when you put the shuttle lever in neutral position.]
- PTO control switch (if equipped) and PTO lever
must be in the OFF position.
Never fail to install the seat with neutral switch.
NOTE: A seat switch is incorporated into the sys-
tem. The engine stops when the operator
leaves the seat when either the PTO is
engaged and / or shift lever is not in neutral.
NOTE: All transmission levers must be in neutral.
Wiring / Fuse Arrangement
CAUTION: Keep all wiring connections
clean and tight. Make sure wiring is cor-
rectly secured to prevent damage.
Do not alter wiring by adding home-made extensions
or replacements. Doing so can eliminate fuse protec-
tion and/or eliminate safety features of the system.
Tractor is equipped with negative (-) ground system.
Tractor metal parts provide many electrical connec-
tions. For this reason, all positive (+) circuits must be
insulated to prevent grounding or short circuits and
prevent possible fire.
Do not replace any fuse with a fuse of higher amper-
age rating. DO NOT use wire (or foil) to by-pass fuse
protection. Fire can result.
If fuses blow repeatedly, examine electrical system for
grounded or shorted circuits.
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......