TH4295,4335,4365
84
Starting Switches
This Tractor is equipped with a neutral-shart system
consisting of neutral switches and a relay. To start
Tractor, ALL the following is required:
Range shift lever must be in neutral position
PTO control switch must be in OFF position
NOTE: A seat safety switch is incorporated into sys-
tem. The engine stops when operator leaves
seat when either PTO is engaged and / or
range shift lever is not in neutal.
WARNING: DO NOT bypass or modify the
neutral switch. If the neutral start system
does not operate properly, consult your
Dealer immediately.
Safety Switches
This Tractor is equipped with a safety-start system
consisting of safety switches and safety relay. To start
Tractor, ALL the following is required:
• Gearshift lever must be in neutral position
• PTO control switch must be OFF
Wiring / Fuse Arrangement
CAUTION: Keep all wiring connections
clean and tight. Make sure wiring is cor-
rectly secured to prevent damage.
CAUTION: DO NOT alter wiring by adding
“home-made” extensions or replace-
ments. Doing so can eliminate fuse pro-
tection and/or eliminate safety features of
the system.
CAUTION: Tractor is equipped with nega-
tive (-) ground system. Tractor metal parts
provide many electrical connections. For
this reason, all positive (+) circuits must
be insulated to prevent “grounding” or
short circuits and prevent possible fire.
CAUTION: DO NOT replace any fuse with
a fuse of higher amperage rating. DO NOT
use wire (or foil) to by-pass fuse protec-
tion. Fire can result.
If fuses blow repeatedly, examine electri-
cal system for “grounded” or “shorted”
circuits.
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
