LUBRICATION & PERIODIC MAINTENANCE
75
FIG. 6-7: To Replace Engine Oil Filter
-Unscrew ele-
r
ment, 4, from engine and discard. Make sure original
filter gasket has been removed.
Lubricate new gasket on replacement element with
clean engine oil. Screw on new element until gasket
contacts adapter and then tighten element 1/2 turn
more.
Clean spilled oil and refill crankcase. Start engine,
check for leaks and replenish oil level as required.
Transmission Oil & Filters
Transmission oil lubricates transmission, center hous-
ing, and rear axles and also serves as hydraulic fluid.
Transmission oil and filter should be changed after
first 50 hours of operation and then every 200 hours
thereafter.
FIG. 6-8:
To Check Transmission Oil Level -Park Trac-
tor on level ground. Oil level should be indicated in oil
level gauge, 1.
Oil level is replenished, as necessary, by removing
filler plug, 2, and adding oil through filler opening.
NOTE: Adding oil to transmission will also maintain
correct oil level in center housing and rear
axles.
FIG. 6-9:
To Replace Transmission Oil -Remove drain
plug, 3, and completely drain oil from system.
IMPORTANT: Completely lower three-point hitch
prior to draining transmission oil.
FIG. 6-7
FIG. 6-8
FIG. 6-9
4
1
2
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
