TH4295,4335,4365
74
LUBRICATION DETAILS
Grease Fittings
Lubricate all grease fittings every 50 hours of opera-
tion. Clean grease gun and fittings before and after
greasing to prevent contamination from dirt.
NOTE: When operating in muddy or extremely wet
conditions, daily lubrication of fittings is
recommended.
Engine Oil & Filter
Engine oil and filter should be changed after first
50 hours of operation and then every 100 hours
thereafter.
FIG. 6-5:
To Check Engine Oil Level -Tractor must be
parked on level ground with engine off. Pull out dip-
stick, 1, and check that oil level is between upper limit,
F, and lower limit, L, on dipstick. Wipe off dipstick, mo-
mentarily reinstall in engine and check oil level again.
Add oil through filler opening, 2, as required.
NOTE: Add oil slowly to assist in venting air from
crankcase.
FIG. 6-6:
To Change Engine Oil -Operate Tractor until
oil is adequately warmed. Remove drain plug(s), 3,
from engine and allow all oil to drain.
Reinstall drain plug(s) and fill engine crankcase to up-
per limit on dipstick.
FIG. 6-5
FIG. 6-6
L
O
O
F
L: Lower
F: Full
1
2
3
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
