SAFETY
7
BEFORE OPERATION
(1) Set up an operation plan with sufficient time al-
lowance. A tight plan may result in unexpected
accidents when work has to be rushed.
(2) Inspect and service the machine periodically in
accordance with the instructions given in the
operation manual to maintain the machine in the
best condition.
Pay special attention to the controls, especially to
the brakes and clutch, and safety measures for
the machine functions properly and performs nor-
mally, the chance of an accident will be reduced
greatly.
If
safety devices are damaged or do no work,
please consult your ISEKI dealer.
(3) Before removing a safety devices, such as a
safety cover, be sure that the machine has
stopped completely. Never forget to replace the
removed part after servicing.
(4) Never re fill fuel while the engine is running or
is still hot. Keep away from open fires an never
smoke around a fuel tank or while fueling into the
machine. Never use open flames for illumination
when fueling the machine at night.
STARTING ENGINE AND MOVING TRACTOR
(1) Before starting the engine indoors, make sure
that there is proper ventilation because exhaust
fumes contain poisonous carbon monoxide, which
cause lethal poisoning.
(2) Before starting the machine, confirm that the
transmission gear has been shifted to the ap-
propriate speed, that there is no one near the ma-
chine, and that the implement is securely installed
on the machine.
Always operate the machine from the operator’s
seat. Never leave the seat except in an emer-
gency when operating the machine.
(3) Before starting to move, pay attention to safety
conditions around the machine to avoid injury to
bystanders or damage to property. Never move
abruptly.
FIG. 1-6
FIG. 1-7
FIG. 1-8
FIG. 1-9
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
