INSTRUMENTS & CONTROLS
29
FIG. 4-5
FIG. 4-6
Indicator Light Strip
FIG. 4-5:
Indicator light strip, 2, contains several warn-
ing lights to monitor certain functions. Currently used
positions (from right to left) are:
•
l
Main (High) Beam - Illuminates when head-
lamps in front grille are selected to high beam
position by light switch.
•
M
Power Take-Off (PTO) - Illuminates when PTO
control switch is moved to engage PTO clutch
pack (PTO operating). Light will go out when
PTO switch is moved to off.
•
o
Engine Oil Pressure - Illuminates if engine oil
pressure is low. If light comes on while engine
is running, shut off engine immediately and
investigate cause.
•
b
Battery Charge - Illuminates when main switch
is turned “ON”and will go out after engine
starts, to indicate battery is being charged.
•
Trailer Monitor - Blink when warning lamp
switch is turned on.
•
Parking Brake - Illuminates when the parking
brake lever is pulled to upward to indicate en-
gaged parking brake.
•
4
4WD Monitor - Illuminated when the four wheel
drive lever is pushed downward, to indicate the
front axle (4WD) is engaged.
Coolant Temperature Gauge
FIG. 4-6:
Gauge, 3, indicates engine coolant tempera-
ture when main switch is selected to ON
•
- Shows too cool temperature for severe work.
Allow to warm (needle in mid position) before
applying heavy load.
•
- Indicates overheating (red area on gauge).
Reduce engine speed to idle, allow to run
at no load several minutes and investigate
cause (refer to “Troubleshooting”).
CAUTION: Do not service hot engine. Al-
low to completely cool before servicing or
removing radiator cap.
2
3
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
