Iseki TH4295, Operation Manual

Page: 15 / 113

TH4295,4335,4365
12
INSPECTION AND MAINTENANCE
(1) When servicing the tractor or mounting or dis-
mounting an implement, place the tractor on level,
hard ground which is sufficiently illuminated, or
unexpected accidents may occur.
(2) When servicing the tractor, follow the instructions
listed below:
• Stop the engine.
• Apply parking brakes.
• Disengage all PTO.
• Place all gear shift levers in neutral.
• Remove the starter key.
• Lower the implement fully, if equipped.
If not, your hands or clothes may be caught or
sandwiched between.
(3) When servicing the tractor, use proper tools. Us-
ing makeshift tools may lead to injuries or poor
servicing, which may result in unexpected acci-
dents during operation.
(4) The engine, muffler, radiator, etc. are very hot just
after operation, so wait until they cool down suf-
ficiently to avoid burns.
(5) Never remove the radiator cap while the engine is
hot or running. Wait until the engine cools down
and then relieve the radiator pressure by releas-
ing the radiator cap. Carelessly pouring cooling
water into the heated radiator can cause serious
damage to the radiator and the engine. Careless
removal of the radiator cap can cause serious
injury because of overheated water vapour.
(6) Never fit unauthorized implements or attempt
unauthorized modification.
(7) Be sure to reinstall the removed safety covers in
place as exposed dangerous parts may cause
serious injury.
(8) Avoid high-pressure fluids. Escaping fluid under
pressure can penetrate the skin and cause seri-
ous injury, so keep hands and body away from
pin holes and nozzles ejecting such fluids. Be
sure to consult your dealer about the hydraulic
and fuel injection system trouble.
When checking for leaks, use a piece of card-
board or wood without fail. If any hydraulic fluid
is injected accidentally into the skin, it must be
removed within a few hours by a doctor familiar
with this type or injury.
FIG. 1-21