TH4295,4335,4365
92
CLUTCH HOUSING PLUG
FIG. 6-45:
The plug, 1, should be removed from bot-
tom of clutch housing once a year. Any oil leakage
from engine rear crankshaft seal and / or transmission
input will be indicated by oil draining through hole.
Contact your Dealer if oil leakage is evident.
TORQUE CHART
FIG. 6-46:
All fasteners should be tightened in accor-
dance with torque chart unless a specific torque value
is indicated in relevant maintenance information.
STORAGE
FIG. 6-47:
If tractor is to be stored for extended peri-
ods, such as off-season non-use, certain measures
should be taken for its preservation during such
periods. These measures will vary according to geo-
graphical area and storage season.
Replace engine oil and filter. Operate at low idle five
minutes to lubricate parts.
Lubricate all grease fittings and lightly oil control link-
age pivots.
Detach implements.
Store tractor in enclosed area, if possible, for protec-
tion from weather.
If tractor cannot be placed in an enclosed area, use
some sort of cover and cover exhaust pipe to prevent
entrance of rain or snow.
Block up tractor to remove weight from tires and to
protect tires from oily or damp floor.
Raise and lock three-point lift linkage in up position by
turning lowering rate control knob 1 fully clockwise.
FIG. 6-45
4T
7T
ft.-lbs.
N.m
ft.-lbs
N.m
M6 4.3-5.7
5.8-7.7
7.2-9.3
9.8-12.6
M8 9.3-13.0
12.6-17.6
18.0-25.2
24.4-34.2
M10 14.4-21.6
19.5-29.3
39.7-50.5
53.8-68.5
M12 36.1-43.3
48.9-58.7
65.0-79.4
88.1-107.7
M14 50.5-57.8
68.5-78.4
93.9-108.4
127.3-147.0
M16 72.2-86.7
97.9-117.5
115.6-130.0 156.7-176.3
M18 86.7-101.1
117.5-137.0 144.5-173.4 195.9-235.0
M20 108.4-122.8 146.0-166.5 173.4-187.8 235.0-254.6
FIG. 6-46
FIG. 6-47
1
1
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
