LUBRICATION & PERIODIC MAINTENANCE
73
Opening / Closing Hood
FIG. 6-2:
Turn locking knob, 1, one quarter to clock-
wise on top of engine bonnet, pull upward the bonnet.
Close in reverse order, engine bonnet will be neces-
sary to push downward on locks, 1, and then turn one
quarter counterclockwise to secure.
FIG. 6-3:
When top the front grille, 2, is pulled up, the
lock can be disengage. Disconnect the headlamp wir-
ing couplers and lift front grille upward to disengage
the lower hooks and remove it from the tractor.
When reinstalling front grille, place the grille on the
lower hook and push on the top.
Removing / Reinstalling Side Cover
FIG. 6-4:
When top of the side cover, 3, is pulled out
the lock can be disengaged.
The cover can be removed by slipping the side cover
off of the two hinges on the bottom.
When reinstalling the side cover, place the cover on
the hinges at the bottom, and push on the top.
The side cover (left) can be removed with the same
procedure.
The muffler is adjacent to the left side cover. Make
sure to allow it to cool before removing.
FIG. 6-2
FIG. 6-3
FIG. 6-4
1
2
3
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
