LUBRICATION & PERIODIC MAINTENANCE
89
WHEELS & TIRES
Examine wheels and tires periodically for correct
inflation pressures, tight wheel bolts, and any physical
damage that may be a detriment to Tractor operation
and operator safety. Correct condition prior to Tractor
operation.
Tire Inflation Pressures
FIG. 6-38:
Maintaining correct tire pressure will help
insure tire long life. If tires have deep scratches, cuts
or punctures, the respective tire should be repaired or
replaced by qualified personnel as soon as possible.
IMPORTANT: If
necessary to replace any tire(s),
ensure original tire size is used. This
is particularly true on 4WD models to
ensure correct amount of front axle
overspeed (or “lead”) is maintained.
NOTE: It will be required to limit the angle of swing
with stopper when the “A” type tractor
equipped the “7-14” size tyres. (Except cen-
tre ROPS specifications.)
Wheel Bolt tightening torque
FIG. 6-39:
Periodically check all wheel bolt torques.
Correct bolt torques:
Front Wheel Bolts, 1 .......................7 ft.-lbs. (102 N•m)
Rear Wheel Bolts, 2....................120 ft.-lbs. (163 N•m)
CAUTION: Correct wheel bolt torque must
be maintained. Installation of front or mid-
mounted implements (ex; loaders, mow-
ers) impose increased loads and require
frequent checking of wheel bolts.
Tractor
type
tyres
tyre
location size
pressure
PSI(kpa)
TH4295
TH4335
TH4365
AG
front 6-14-4PR
26(176)
rear 12.4-16-4PR
14(98)
AG
front 6-14-4PR
26(176)
rear 9.5-22-4PR
19.9(137)
AG
front 7-14-4PR
26(176)
rear 9.5-24-6PR
14(98)
AG
front 7-16-4PR
26(176)
rear 11.2-24-4PR
17(117)
Turf
front 24X8.50-12-4PR
23(157)
rear 315/80D-16-4PR 14(98)
Turf
front 26X12.00-12-4PR 17(117)
rear 13.6-16-4PR
14(98)
: Possible to equip to “A” type tractor.
FIG. 6-38
FIG. 6-39
Stopper
1
2
3
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......