LUBRICATION & PERIODIC MAINTENANCE
81
Air-Bleeding Fuel System
To bleed air from the fuel system:
• Fill the fuel tank.
• Turn the fuel cock to “ON”.
• Turn the main switch “ON”
FIG. 6-25:
If the engine still fails to start, pressure in-
jection line can be loosened where they attach to the
injectors. Turn the engine over several times, until fuel
spouts out, then tighten the lines and stop the engine.
NOTE: Normally, further air-bleeding is not required
due to electric fuel pump operating when
main switch in instrument panel is ON.
If engine will not start after several attempts,
check fuel pump fuses (see “Electrical
System”).
Fuel Tank Filler Cap
When fuel tank filler cap is removed, a hissing or pop-
ping noise may be noticed. This is due to cap design
and is a normal condition. Do not alter cap or use
unapproved replacement as fuel leakage may occur in
event of Tractor upset.
Throttle Lever
FIG. 6-26:
Hand throttle lever should remain in posi-
tion selected by operator. Through normal use, friction
against lever may decrease, causing lever to move
out of selected position. Turn adjusting nut, 1, as re-
quired to retain throttle lever in position selected.
NOTE: Throttle
lever
friction adjustment is accessed
by removing rear steering column cover.
FIG. 6-25
FIG. 6-26
1
Summary of Contents for TH4295
Page 1: ...TH4295 TH4335 TH4365 MODELS I S E K I T R A C T O R S ...
Page 3: ......
