
Goodrive300-LIFT series inverter
Commissioning guidelines
-94-
is set to 0×1, the distance for decelerating from high speed to 0 is
, and that for decelerating from medium or low speed to 0 is
, as shown in Figure 7-13.
Speed switch point
Command
cancelling point
v
t
Figure 7-13 Curve of deceleration without creeping
When distance control
is set to 0×11, the distance for decelerating from high speed to
, that for decelerating from medium or lower speed to creeping speed is
, and that for decelerating from creeping speed to 0 is
, as shown in Figure 7-14.
Speed
switch point
Command
cancelling point
v
t
Distance for
decelerating from
high speed to
creeping speed
Distance for
decelerating from
creeping speed to 0
Figure 7-14 Curve of deceleration with creeping