S R A / S F X 2 1 0 0 S E R I E S S A T E L L I T E R E C E I V E R
74
Figure 4-25 Edit Source NAT Table Page
The following fields can be edited on the Edit SNAT Table page:
Edit Field
Description
!
Clicking on the “not” (!) check box negates the logic for the
immediate edit field to the right of the check box. For example,
!224.1.1.1 for the Source IP would mean all IP packets whose
source IP address is not 224.1.1.1.
Original Source
Enter a source IP Address in dotted decimal notation, here if you
wish to filter IP packets on their original source address.
Port
(Original Source,
Destination IP, &
New Source)
Enter a TCP or UDP Port number in any of the three port fields,
if you wish. If a port is specified, you must select a specific
protocol (TCP or UDP).
Destination IP
Enter a Destination IP Address in dotted decimal notation, here
if you wish to filter IP packets on their destination IP address.
New Source
Enter a New Source IP address that will replace the Original
Source IP address, if using SNAT as the action.
Protocol
Enter the IP packet protocol. Options are Any Protocol (default),
UDP/IP Protocol, or TCP/IP Protocol. If port numbers are
specified in a rule, you must select UDP or TCP.
NOTE
:
The
Original Source
IP/Port and
Destination
IP/Port fields
are optional,
and “Any” is
the implied
default value.
